| View previous topic :: View next topic |
| Author |
Message |
arh1st
Joined: 11 Sep 2009
Posts: 3
|
 Posted: Fri Sep 11, 2009 10:03 pm Post subject: Multi Pic Programmer 5v2 + WinPic800 v3.64 |
 |
|
Hello everyone! Thanks to this great site I've recently & successfully built a Multi Pic Programmer 5v2 & I'm very glad I've managed to make it work.  The problem is though I cannot make it through with WinPic800 v3.64 (the latest update available).  The programmer is actually well detected by the WinPic800 (as a JDM programmer), but I get no data from the PIC's program memory while reading (it's a 12F675)...  Other software like DL4YHF's WinPic, IC-Prog & PICPgm can read from & write to the PIC without any issue whatsoever. If anyone has faced this problem also please let me know, thanks!  |
|
| Back to top |
|
 |
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Sat Sep 12, 2009 11:30 pm Post subject: Re: Multi Pic Programmer 5v2 + WinPic800 v3.64 |
|
|
| arh1st wrote: | | Hello everyone! Thanks to this great site I've recently & successfully built a Multi Pic Programmer 5v2 & I'm very glad I've managed to make it work. :D The problem is though I cannot make it through with WinPic800 v3.64 (the latest update available). :( The programmer is actually well detected by the WinPic800 (as a JDM programmer), but I get no data from the PIC's program memory while reading (it's a 12F675)... :? Other software like DL4YHF's WinPic, IC-Prog & PICPgm can read from & write to the PIC without any issue whatsoever. If anyone has faced this problem also please let me know, thanks! :) |
check whether 12F675 has facility for chip information display? This chip belongs to Basic range. try to read the datasheet.
_________________
Regards
Sarma |
|
| Back to top |
|
|
arh1st
Joined: 11 Sep 2009
Posts: 3
|
| Posted: Sun Sep 13, 2009 3:54 am Post subject: |
|
|
| I don't think it's related to chip's specifications. I've solved the issue actually... apparently WinPic800 doesn't work well with (my) COM2 port, I've switched the cable & the settings from COM2 to COM1 & now everything's in place & running properly. I reckon is a bug for WinPic800 as the other programs were working without a problem. Thanks! |
|
| Back to top |
|
|
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Sun Sep 13, 2009 10:17 am Post subject: |
|
|
| arh1st wrote: | | I don't think it's related to chip's specifications. I've solved the issue actually... apparently WinPic800 doesn't work well with (my) COM2 port, I've switched the cable & the settings from COM2 to COM1 & now everything's in place & running properly. I reckon is a bug for WinPic800 as the other programs were working without a problem. :D Thanks! :) |
Did you configure it with COM2 port. we cant do it as we have only one port with 9 pins, followed by DB25.
Thus we cant comment further.
However , Nice to know that it is working well
Perhaps you can leave a complaint on the forum of www.winpic800.com
at least others would get service.
_________________
Regards
Sarma |
|
| Back to top |
|
|
arh1st
Joined: 11 Sep 2009
Posts: 3
|
| Posted: Tue Sep 15, 2009 3:28 pm Post subject: |
|
|
| Yes, evidently, as the line tests were working & the LED was blinking like during normal operation. Thanks. |
|
| Back to top |
|
|
VU2TRF
Joined: 10 Feb 2007
Posts: 13
Location: KOLKATA
|
| Posted: Sat Jan 16, 2010 4:56 pm Post subject: WINPIC800 LANGUAGE PROBLEM |
|
|
Respected Sarma ji,
I have downloaded and installed winpic800. Though I have selected English language but it is showing different. I have tried several times but no difference.
Kindly advice.
Regrads,
VU2TRF |
|
| Back to top |
|
|
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Sat Jan 16, 2010 6:28 pm Post subject: Re: WINPIC800 LANGUAGE PROBLEM |
|
|
| VU2TRF wrote: | Respected Sarma ji,
I have downloaded and installed winpic800. Though I have selected English language but it is showing different. I have tried several times but no difference.
Kindly advice.
Regrads,
VU2TRF |
Click open the application -irrespective of languahe.
On the top you find few buttons
The "LAST BUT one" is language selection.
click it, change to English and then close the file
next time when you open , it would be your chosen language.
All the best.
_________________
Regards
Sarma |
|
| Back to top |
|
|
VU2TRF
Joined: 10 Feb 2007
Posts: 13
Location: KOLKATA
|
| Posted: Thu Jan 28, 2010 7:17 am Post subject: |
|
|
Thank you, Sir.
I have sent a mail to you for your guidance. If you kindly reply I shall be oblized.
Best regards,
VU2TRF |
|
| Back to top |
|
|
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Thu Jan 28, 2010 3:12 pm Post subject: |
|
|
| VU2TRF wrote: | Thank you, Sir.
I have sent a mail to you for your guidance. If you kindly reply I shall be oblized.
Best regards,
VU2TRF |
not received any mail
_________________
Regards
Sarma |
|
| Back to top |
|
|
eniyuki
Joined: 03 Feb 2010
Posts: 1
|
| Posted: Wed Feb 03, 2010 3:09 pm Post subject: |
|
|
want to share my success, this is my 1st first post.
IM a NEWBIE(hobbyist) when it comes to programming but i built a multi pic programmer 5v2 earlier for my project and using 3.63g winpic800. i programmed 16f628a and 16f84a successfully and flawlessly. no problems at all. thanks to mvs sarma(read all his replies to others) and feng for his work. |
|
| Back to top |
|
|
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Wed Feb 03, 2010 10:58 pm Post subject: |
|
|
Welcome Enlyuke,
it is pleasing to note that you have read all the posts and nice that you vae succeeded. All the best to Hamworld and hope to see you comming up in the hobby.
_________________
Regards
Sarma |
|
| Back to top |
|
|
mvs sarma
Joined: 11 Oct 2006
Posts: 448
Location: Hyderabad, India
|
| Posted: Mon Jul 26, 2010 12:22 pm Post subject: |
|
|
| ddexxters75 wrote: | I don't think it's related to chip's specifications. I've solved the issue actually... apparently WinPic800 doesn't work well with (my) COM2 port, I've switched the cable & the settings from COM2 to COM1 & now everything's in place & running properly. I reckon is a bug for WinPic800 as the other programs were working without a problem.
__________________________________
Web Design Manchester
SEO Manchester |
did you define COM2 on the winpic800 settings hardware?
_________________
Regards
Sarma |
|
| Back to top |
|
|
manu_alld
Joined: 17 May 2010
Posts: 8
|
| Posted: Tue Jul 27, 2010 3:05 pm Post subject: |
|
|
If someone wish, they can also change the COM port used from device manager on a windows based machine.
sometimes if you have modem or other communication devices used, certain ports may not be free in system.
On device manager
One you navigate to Ports (COM & LPT)
select the shown device and click properties.
is will show device abc (com2) properties
click on Advanced
select a different com pot number from drop down. |
|
| Back to top |
|
|
|
Search
Submit News
Profile
Register
Log in
Home
