Hamradio.in

High Gain Prescaler

vu3nsh

Jan 4, 2004

While attaching this circuit with a 30 MHz frequency counter, the reading range will expand upto 200 MHz. The Prescaler IC will give an output equal to the input frequency value divided by 100. The diodes at input stage D1 & D2 will clip over-input signals. So, if the front-end is overloaded, then there is no output from the IC. The total unit is working on 5V DC and it will be provided from the regulator IC 78L05. The transistors T1 & T2 are bipolar type and it will handle upto 6GHz. It is a low noise category transistor and this will give excellent performance in the frontend. Use Epoxy PCB. All components should be fixed with minimum lead length. After assembling the PCB clean thoroughly with Isopropyl. PCB is available with the author.

Fig. 1 Circuit diagram
Fig. 1 Circuit diagram